Friday, July 12, 2013

Build a 65W Notebook Laptop Power Adapter

Using TOP269EG off-line switcher IC, (U1), in a flyback configuration can be designed a very simple high efficiency notebok laptop power adapter.TOP269EG IC has an integrated 725 V MOSFET and a multi-mode controller. It regulates the output by adjusting the MOSFET duty cycle, based on the current fed into its CONTROL pin.This laptop power adapter circuit will provide a fixed 19 volts output voltage at a maximum current of 3.5A. input voltage range is between 90 to 265VAC.


Common-mode inductors L3 and L4 provide filtering on the AC input. X class capacitor C1 provides differential filtering, and resistors R1 and R2 provide safety from shock if the AC is removed, by ensuring a path for C1 to discharge. This is required by safety agencies when the capacitor value exceeds 100 nF. Bridge rectifier D1 rectifies the AC input, and bulk capacitor C2 filters the DC.




No comments:

Post a Comment

Note: Only a member of this blog may post a comment.