Showing posts with label speed. Show all posts
Showing posts with label speed. Show all posts

Tuesday, September 10, 2013

Dual Basic Motor Speed Controllers Circuit Diagram

Here  are two simple 12V DC motor speed controllers that can be built for  just a few dollars. They exploit the fact that the rotational speed of a  DC motor is directly proportional to the mean value of its supply  voltage. The first circuit shows how variable voltage speed control can  be obtained via a potentiometer (VR1) and compound emitter follower (Q1  & Q2). With this arrangement, the motor’s DC voltage can be varied  from 0V to about 12V. This type of circuit gives good speed control and  self-regulation at medium to high speeds but very poor low-speed control  and slow starts. The second circuit uses a switchmode technique to vary  motor speed.

 Dual Basic Motor Speed Controllers Circuit Diagram fig 1

 Dual Basic Motor Speed Controllers Circuit Diagram fig 1

Here a quad NOR gate (IC1) acts as a 50Hz  astable multivibrator that generates a rectangular output. The  mark-space ratio of the rectangular waveform is fully variable from 20:1  to 1:20 via potentiometer VR1. The output from the multivibrator drives  the base of Q1, which in turn drives Q2 and the motor. The motor’s mean  supply voltage (integrated over a 50Hz period) is thus fully variable  with VR1 but is applied in the form of high-energy "pulses" with peak  values of about 12V.

 Dual Basic Motor Speed Controllers Circuit Diagram fig 2

 Dual Basic Motor Speed Controllers Circuit Diagram fig 2
 

This type of circuit gives excellent  full-range speed control and gives high motor torque, even at very low  speeds. Its degree of speed self-regulation is proportional to the mean  value of the applied voltage. Note that for most applications, the power  transistor (Q2) in both circuits will need to be mounted on an  appropriate heatsink.


Sourced by : Streampowers
Read More..

Saturday, March 30, 2013

12V Speed Controller Dimmer

This handy circuit can be used as a speed controller for a 12V motor rated up to 5A (continuous) or as a dimmer for a 12V halogen or standard incandescent lamp rated up to 50W. It varies the power to the load (motor or lamp) using pulse width modulation (PWM) at a pulse frequency of around 220Hz.  SILICON CHIP has produced a number of DC speed controllers over the years, the most recent being our high-power 24V 40A design featured in the March & April 2008 issues. Another very popular design is our 12V/24V 20A design featured in the June 1997 issue and we have also featured a number of reversible 12V designs.
 
Project Image :
12v-speed-controllerdimmer pro
 12V Speed Controller/Dimmer Project Image

For many applications though, most of these designs are over-kill and a much simpler circuit will suffice. Which is why we are presenting this basic design which uses a 7555 timer IC, a Mosfet and not much else. Being a simple design, it does not monitor motor back-EMF to provide improved speed regulation and nor does it have any fancy overload protection apart from a fuse. However, it is a very efficient circuit and the kit cost is quite low.

Parts layout:

12v-speed-controllerdimmer2_Parts layout

Connection diagram:

12v-speed-controllerdimmer3_Connection diagram

There are many applications for this circuit which will all be based on 12V motors, fans or lamps. You can use it in cars, boats, and recreational vehicles, in model boats and model railways and so on. Want to control a 12V fan in a car, caravan or computer? This circuit will do it for you. The circuit uses a 7555 timer (IC1) to generate variable width pulses at about 210Hz. This drives Mosfet Q3 (via transistors Q1 & Q2) to control the speed of a motor or to dim an incandescent lamp.

Circuit diagram :
12v-speed-controllerdimmer Circuit diagram
12V Speed Controller/Dimmer Circuit Diagram

While the circuit can dim 12V halogen lamps, we should point out that dimming halogen lamps is very wasteful. In situations where you need dimmable 12V lamps, you will be much better off substituting 12V LED lamps which are now readily available in standard bayonet, miniature Edison screw (MES) and MR16 halogen bases. Not only are these LED replacement lamps much more efficient than halogen lamps, they do not get anywhere near as hot and will also last a great deal longer.

Source : Streampowers
Read More..