Showing posts with label beep. Show all posts
Showing posts with label beep. Show all posts

Friday, May 17, 2013

Car Alarm Arming Horn Beep Canceller

Car Alarm Arming Horn Beep CancellerCar Alarm Arming Horn Beep Canceller Circuit diagram

Its a abundant accessibility that best avant-garde cars appear with a congenital in alarm, about it is annihilation but babble abuse that the horn sounds back the anxiety is armed. Disconnecting the anxiety arrangement from the horn broadcast will annihilate this, but anticipate the horn from aural in the alike of an absolute alarm.

This circuit serves to blackout the arming beep yet advance the anxiety by introducing a baby adjournment into the signal. It sits amid the anxiety and horn relay. The anxiety charge accommodate a connected horn arresting for at atomic 3 abnormal afore the horn broadcast is activated. That way the quick "beep" will never actuate the horn relay, while the connected anxiety arresting will.
Read More..

Tuesday, May 14, 2013

Whistle to beep circuit


This simple circuit produces a beeping sound that lasts for around 3 seconds whenever you make a whistle. The CMOS Hex inverter CD4049 is the heart of this circuit. Out of the six inverters in CD4049, U1a is wired as an audio amplifier which amplifies the signal picked up by the microphone M1.The U1b is wired as a band pass filter with center frequency around 2KHz.The filter is necessary in order to pass the frequency corresponding to whistling sound and suppress all other frequencies .If the filter is not there, the circuit could easily get false triggered.U1d is wired as a 3S delay monostable multivibrator.The output U1d drives the astable multivibrator formed by U1e and U1f.The astable multivibrator is operating around 4Hz.The combined effect is a intermittent beeping sound that lasts for around 3S.Transistor Q1 is used to drive the buzzer B1.Notes.

* Assemble the circuit on a good quality PCB.
* The circuit can be powered from a 3V battery.
* IC U1 is a CMOS CD4049 Hex inverter.
* M1 can be an electret microphone.
* B1 can be a 3V piezo buzzer.
* Mount the IC on a holder.
* The duration of beeping can be adjusted by varying the components C4 and R9.

Read More..